PRECISION MACHINING

CNC mill cutting aluminum parts held in vises under coolant spray

Advanced machining for complex manufacturing work
APE combines advanced CNC machining with engineering, fabrication, assembly, and project support to take complex hardware from design through production.

CAPABILITIES

APE is particularly well suited to one-off prototypes, development hardware, rapid design iterations, low-volume/high-mix programs, bridge production, and recurring short- to medium-run manufacturing where setup reduction, five-axis or mill-turn processing, or engineering involvement creates meaningful value.
Machining at APE is not isolated from the rest of the project. Our machining team works alongside engineering, fabrication, assembly, and project management to address manufacturability issues early and support complex builds from initial design through completed hardware.
Machining backed by engineering.

CNC mill cutting aluminum parts held in vises under coolant spray

5-Axis CNC Machining

3+2 positional and simultaneous five-axis machining for complex geometry, multi-face features, fewer setups, and reduced repositioning error.

Machinist holding a finished CNC-machined aluminum housing

Mill-Turn Machining

C-axis positioning, live tooling, and Y-axis milling allow turned and milled features to be completed in a single setup, reducing secondary operations and accumulated tolerance error.

High-Speed CNC Milling

Efficient aluminum machining, plate work, fixture plates, larger components, and short- to medium-run production.

Batch of precision-machined stainless steel threaded parts

CNC Turning

Small production components through larger, tighter-tolerance turned parts.

APE machinist and engineer reviewing a setup inside a CNC machine

Prototype Through Production

Engineering-intensive prototypes, repeatable production work, custom fixtures, and integrated design-through-fabrication support.

Featured Machines

APE machine shop floor with Haas and Mazak CNC machining centers

Five-axis, mill-turn, and high-speed vertical machining centers, plus additional equipment: a Haas SL-10 CNC lathe, Bridgeport mill, and manual lathe for smaller turned parts, secondary operations, modification, and general support work.
Full specifications are in the downloadable machine capabilities sheet.

Mazak VC-Ez 20X

31.50 × 20.08 × 20.08 in. machine travel with integrated five-axis tables for 3+2 and simultaneous machining. Well suited to complex multi-face components, compound geometry, precision housings, brackets, and repeat production.

Machinist loading a part in the Mazak VC-Ez 20X five-axis machining center

Mazak Quick Turn 250MY

C-axis turning with live tooling and Y-axis milling for completing turned and milled features in a single setup. Approximately 14.75-in. maximum turning diameter.

Machinist operating the Mazak Quick Turn 250MY mill-turn center

Haas High-Speed Vertical Machining

One VF-3SSYT with removable five-axis trunnion, two VF-4SS machining centers with 50 × 20 × 25 in. travel, and one VF-2 for prototypes, fixtures, plate work, larger components, and production machining.

MATERIALS &
QUALITY

APE routinely machines aerospace and industrial materials including 6061, 7075 and 2024 aluminum; 17-4 PH and 15-5 PH stainless; titanium; tool steels; carbon and alloy steels; copper alloys; and engineering plastics including PEEK and Delrin.
General machining requirements are commonly held to ±0.005 in., with ±0.001 in. precision features routinely supported. Tighter requirements, including selected features approaching ±0.0005 in. or below, are evaluated based on geometry, material, thermal conditions, tooling, and inspection methodology.
AS9100- and ISO 9001-certified, with AS9102 first article inspection support, a portable Romer CMM, Renishaw machine probing, documented final inspection, and material traceability and certificates of conformance when required.

Designed for Flow

The expanded shop was laid out digitally before installation to maintain clear access for carts, pallet jacks, operators, and material. Standardized workstations allow machinists to move between machines without losing time, while tightly managed inventory and work-in-progress keep parts moving instead of sitting on racks.

Machinist walking through the open aisles of APE's machine shop

Discuss Your Project

Aerospace and defense hardware, automation and manufacturing equipment, precision tooling and fixtures, complex prototype components, low- and medium-volume production, multi-component assemblies, and tight-tolerance turned and milled parts.

Contact Us
Contact Us

Quality & Certifications

At APE, quality is woven into every part of our project life cycle. From design verification to the raw materials we use, to final assembly, our AS9100 certified quality management system...  Read more